Honda CX500, GL500, CX650C - Painting the rear drum brake cover
Before using this site please read the site disclaimer. Also please note that any links provided may be part of an affiliate programme (viz. eBay, Amazon) which helps support the site as I will earn a commission when visitors make a qualifying purchase.
The outside of this particular brake drum cover could do with some TLC:
Don't lose the little tab:
Take note of the inside - it's keyed so it can only go back on one way:
A sink scourer and steel pan scrubber:
...and a little bit of metho to help get some of the grease off:
Ten minutes of scrubbing gets us to here:
Masking off areas with some tape:
Note: Next time we will leave the tip of the spline unmasked. Only the head of the screw needs painting:
Undercoat applied - in this case we are using Duplicolor High Heat engine primer:
More undercoating:
Including the little tab:
Gloss black Duplicolor High Heat:
We'll update with a photo of it on the bike.
MotoFaction is a free resource, but the server isn't free. If a writeup here saved you time or money, please consider supporting the site:
Buy me a coffee
You can also support us via Patreon.
