Home
Motorcycles
Honda CX and GL
CX650 and GL650 Oil Pump component measurements

CX650 and GL650 Oil Pump component measurements

Before using this site please read the site disclaimer. Also please note that any links provided may be part of an affiliate programme (viz. eBay, Amazon) which helps support the site as I will earn a commission when visitors make a qualifying purchase.

Here are some measurements of the internals of the oil pump used on a Honda CX650 and GL650, in case you need to replace some parts. First off, we'll look at these three:

Taking a closer look at the CX650 and GL650 oil pump components

First, the washer:

Taking a closer look at the CX650 and GL650 oil pump components

1mm thick, 15mm wide, 11.26mm on the inside. Now for the little bar that sits beneath the washer:

Taking a closer look at the CX650 and GL650 oil pump components

15.71mm long, 4mm diameter. The main shaft:

Taking a closer look at the CX650 and GL650 oil pump components

42.12mm long, 11mm in diameter. The holes in it: Taking a closer look at the CX650 and GL650 oil pump components

4.08mm for the hole that receives the cross-post. The thread that receives the bolt that holds the sprocket on looks to be 5mm.

More to come as we continue to assess this pump.

MotoFaction is a free resource, but the server isn't free. If a writeup here saved you time or money, please consider supporting the site:

Buy me a coffee

You can also support us via Patreon.